The tab mapper is a handy little tool that will render a guitar tab file with graphic chord diagrams displayed alongside. This comes in handy for people who just don't have every single chord shape memorized. Just plug in the web site address of a valid .tab or .crd file and hit "Go". In general, the tab mapper does a better job with printer friendly URLs. If there is more than one way to play a chord, the tab mapper will choose the most common shape. To see other fingerings, click on the chord diagram and you will be taken to the chord calculator.
Original file located @ http://www.fluorolite.com/fluorolite-flat-sheet.
Show me scales that sound good with the chords in this song: A.
Skip to contentFluorescent light flat sheet panels or some people call them ceiling light panels or diffusers ? are extruded acrylic sheets and a cost effective way to diffuse fluorescent light with bulb hiding qualities. Thicknesses* from: .020? to .250?. Flat sheets are the most common fluorescent light diffusers. They are easy to remove either by opening the hinged fluorescent light ballast into the ceiling with 2 levers on one side. Sheets can be custom cut to any size up to 54? x 108?.
Flat sheet replacement diffuser panels thicknesses are measured from the peaks of the prisms not the valley?s. Some competitors will use a sheet that has had the valley?s ground out to save plastic. Be aware that not all flat sheets of the same thickness are of the same quality.
Fluorolite only uses high quality sheets. Our light diffuser panels & cover are made of a strong but flexible clear acrylic. To order flat sheet light diffuser cover for custom size, please go to REQUEST A QUOTE
The industry standard. Excellent U.V. Resistance ? Guaranteed not to yellow for 20 years. Good Shock Resistance.
Polycarbonate (G.E. Lexan ): Moderately U.V. resistant, Virtually Unbreakable, Handles Higher Heat Levels.
How to remove the ceiling Cover for a Fluorescent Light? Many people call us and ask how to take out the ceiling light cover from the fixture to get the measurement. Well it all depends on what style of cover you have.
If it?s just a ceiling light diffuser, parabolic louver or perhaps egg crate than most likely it?s Hinged fluorescent light ballast into the ceiling, you just need to learn how to close the cover correctly. Nowadays, they are simply with levers that lay flat when locked in place and you just pull down to open the door. If there is no door, it probably is where you slide the flat sheet sideways and remove it the same way. In conclusion, if you need anything for ceiling light diffusers, we have them all.
Size: 2×4 .100? | .110? | .125?
Size: 2×2 .100? | .110? | .125?
Size: 1X4 .100? | .110? | .125?
Size: 4×8 | .125?
We can cut to any size, for special size please fill up the Quote Form
Special Order Available Sizes:
Size: 2×4 | .100?
Size: 2×2 | .135?
Size: 1X4 | .135?
Size: 4×8 | .135?
But we can cut to any Custom size, please fill up the Quote Form
Next, we have ceiling diffuser that is designed specifically to span large openings without any objectionable sag. The 3/8? (9,5mm) square-based female prisms not only provide structural rigidity. With a light transmission of approx. 83%. The prisms are oriented perpendicular to the width and length. Parts with a diagonal prism orientation are available on request. Please contact the factory for availability of ceiling light panels.
Size: 2×4 | .200?
Size: 2×2 | .200?
Size: 1X4 | .200?
Size: 4×8 | .200?
Similarity these Ceiling light cover lens offers the light control of an injection molded lens at a fraction of the cost. The3/16? (4,7mm) square-based male prisms suppress luminance at critical angles and deliver 92% of the light output to the 0-60 degree zone. PR19 is one of the best alternatives when brightness control is a consideration but parabolic louvers are not required.
Size: 2×4 | .156?
Size: 2×2 |.156?
Size: 1X4 | .156?
White Acrylic ?
Size: 2×4 | .187?
Size: 4×4 | .187?
Best of Framingham 2021 and 2022 Local Business Award
"We've Got You Covered" and Trace n'Fax are Registered Trademarks of Fluorolite Plastics, LLC. © 2011-2021 All rights reserved Fluorolite Plastics
You must be logged in to post a comment.